• Powder coated epoxy cast iron housing with extended inner ring bearings
• Zone hardened inner ring with 120° spacing setscrew with diamond faceted setscrews
• High temperature felt labyrinth seal and flinger for dry and dusty environment
• Increased internal clearance and high temperature grease
• Looser than standard housing fit for ease of alignment on lightweight frames
• Air Handling noise check for quiet operation
• Sealmaster® exclusive lock pin and dimple for direct lubrication and anti-rotation

Dimensions

Overall Height (in)	2.81 in
Base Width (in)	1.50 in
Overall Width (in)	1.50 in
Overall Length (in)	5.5 in
Bolt Size (in)	3/8 in
Bore Diameter (in)	1 in
Base to Center Height (in)	1.4375 in
Foot Height (in)	0.50 in
Length Through Bore (in)	1.375 in
Centerline to Outermost Bearing Face (in)	0.813 in
Bolt Spacing Min (in)	3.88 in
Bolt Spacing Max (in)	4.38 in

Technical Specifications

Housing Base	Solid
Rolling Element	Ball Bearing
Bore Shape	Straight
Housing Construction	One Piece
Misalignment Type	Static Only
Outer Ring Land Profile	Standard
Options	High Temperature and Air Handling Housing Fit, Noise Tested
Housing Color	Black
Cage Material	PPS - Polyphenylene Sulfide
Housing Type	Pillow Block, Two Bolt
Seal Type	High Temp Labyrinth
Housing Style	Pillow Block
Ability to Relubricate	Yes
Inner Race Heat Treat Method	Zone-Hardened
Vibration Frequency Fundamental Train	0.0068 cps
Fixed vs. Expansion	Fixed
Cage Type	Land Riding Retainer
Vibration Frequency Inner Ring Defect	0.0985 cps
Housing Material	Cast Iron
Radial Clearance	Increased
Housing Coating	Powder Coated
Grease Fitting Thread Size	1/4-28
Misalignment Capability	±2.0° Misalignment - Static Only
Vibration Frequency Roller Spin	0.0442 cps
Lubricant	Synthetic NLGI 2 High Temperature Grease
Static Load Rating (lb)	1,651 lb
Insert	2-1 HT
Bearing Insert Finish	Black Oxide
End Cap Available	No
Vibration Frequency Outer Ring Defect	0.0682 cps
Maximum Speed (RPM)	2750 rpm
Bearing Type	Standard Duty
Max Operating Temperature (F)	400 °F
Size Code	2-015
Shaft Locking Type	Set Screw
Dynamic Load Rating (lb)	2,801 lb
Inner Ring Outside Diameter (in)	1.375 in
Bearing Insert Material	52100 Bearing Steel
Base Length (in)	5.50 in

General Specifications

UPC	662461317655
Weight	2.20 LB
Packaged Length	3.50 IN
Packaged Width	1.69 IN
Packaged Height	5.75 IN
HTC	8483.20.8040
Country of Origin	United States of America