• One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
• Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
• Large oil capacity provides positive splash lubrication and superior cooling capability.
• Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
• The unique quill seal guard protects the input seal from damage during motor installation.
• Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
• Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
• All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
• Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
• Mounting dimensions are interchangeable with most industry standard reducers.

Dimensions

N	10
O	4.65 in
BD	6.5
F	6.38
FA	11.13 in
AK	4.5
C	16.5 in
T	2.5
Center Distance (in)	6 in
BF	0.41
D	6.5
AJ	5.88
A	8.13
TAP Depth	1 in
FZ	0.33 in
LQ	10.45 in
H-Tap size	5/8-11 UNC in
J	12.75 in
G	3.19
B	14.25
K	6.38 in
RQ	10.01 in
BE	0.38 in

Technical Specifications

Series Style	GR-BMQ-L
Assembly	BMQ-L
Input Diameter (in)	0.875 in
Ratio Range	50:1
Ratio	50:1
Shaft Seal Material	Viton
Mounting Style	Base
Overhung Load	3,723
No. of Gear Reductions	Single
Product Line	GR Series - Ironman Worm Gear Reducers
Output Shaft Orientation	L
Output HP	5.597
Input Bore (C Face)	0.875
Model Code	BMQ860
Output Diameter (in)	2.5 in
Output RPM	35
Service Factor	1
Input Style	C-Face Quill
Frame Size	140TC
Thrust Rating - output shaft	3990
Reducer	Worm - Right Angle
Reducer Style	Worm - Right Angle
Output Style	L
Input Keyway (C Face)	3/16 x 3/32
Output Key	5/8 X 4.00
Product Type	Right Angle
Output Shaft Assembly Code	L
Series	GR Series - Ironman Worm Gear Reducers
Series Code	GR
Gear Type	Worm
Input RPM	1,750
Center Distance (in)	6
Input HP @ 1750 RPM	7.242
Input HP	7.242
Motor Frame Size	140
Reduction	Single
Output Shaft Direction	Left
Output Torque Rating (in-lb)	10079 in/lbs
Overhung Load Rating (Output Shaft(lb))	3,723 lb
Housing Material	Cast Iron
Output Shaft	Solid Shaft

General Specifications

UPC	690310034668
Weight	331.00 LB