• Aluminum housing provides superior resistances to corrosion, even in harsh environments.
• Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant – USDA Class H1 approved.
• Large oil capacity provides positive splash lubrication and superior cooling capability.
• Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
• Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.
• Tapered roller bearings on output shaft for high overhung and thrust load capacities.
• The unique quill seal guard protects the input seal from damage during motor installation.
• All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
• Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
• Mounting dimensions are interchangeable with most industry standard reducers.

Dimensions

F	7.63
Hole dia	0.56 in
K	4.69 in
B	10.88
N	6.62
D	4.75
V	0.75 in
T	1.625
O	3.6 in
C	11.25 in
AK	4.5
RQ	5.51 in
LQ	6.16 in
BE	0.38 in
BF	0.41
Center Distance (in)	3.25 in
O*	3.37 in
G	3.82
I	5 in
BD	6.5
J	9.38 in
AJ	5.88
A	9.13

Technical Specifications

Input HP	2.926
Reducer Style	Worm - Right Angle
Output HP	2.293
Reducer	Worm - Right Angle
Series	EL Series - Aluminum Worm Gear Reducers
Output Shaft Orientation	LR
Assembly	TMQ-D
Overhung Load	2,170
Frame Size	140TC
Keyway	3/16 X 3/32
Input RPM	1,750
Ratio	40:1
Output Key	3/8 X 2.25
Output RPM	43
Input Style	C-Face Quill
Shaft Seal Material	Viton
No. of Gear Reductions	Single
Mounting Style	Horizontal Base, Worm Over
Service Factor	1
Motor Frame Size	140TC
Series Style	EL-TMQ-D
Input Quill Diameter (in)	0.875 in
Output Style	D
Input Diameter (in)	0.875 in
Product Line	EL Series - Aluminum Worm Gear Reducers
Product Type	Right Angle
Input Keyway (C Face)	3/16 x 3/32
Output Diameter (in)	1.625 in
Model Code	TMQ832
Output Shaft Assembly Code	D
Gear Type	Worm
Input Bore (C Face)	0.875
Ratio Range	40:1
Center Distance (in)	3.25
Reduction	Single
Output Shaft Direction	Double
Output Torque Rating (in-lb)	3303 in/lbs
Housing Material	Aluminum
Output Shaft	Shaft

General Specifications

Weight

58.00 LB