• Aluminum housing provides superior resistances to corrosion, even in harsh environments.
• Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant – USDA Class H1 approved.
• Large oil capacity provides positive splash lubrication and superior cooling capability.
• Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
• Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.
• Tapered roller bearings on output shaft for high overhung and thrust load capacities.
• The unique quill seal guard protects the input seal from damage during motor installation.
• All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
• Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
• Mounting dimensions are interchangeable with most industry standard reducers.

Dimensions

G	4.38
L1	10.88 in
LM1	13.93
V	1.5 in
BD	9
U	1.25 in
F	8.75
AK	8.5
I	7.55 in
C	13.75 in
BE1	0.5 in
AJ	7.25
B	12.13
J	8.5 in
N	9.06
O	4.78 in
Center Distance (in)	5.25 in
BF	0.53
D	5.75
Hole dia	0.81 in
T	2
K	4.25 in
A	10.75

Technical Specifications

Reducer	Worm - Right Angle
Series	EL Series - Aluminum Worm Gear Reducers
Output Key	1/2 X 1.5
Reducer Style	Worm - Right Angle
Output Shaft Orientation	L
Output RPM	70
Ratio	25:1
Frame Size	140TC
Overhung Load	3,560
Output HP	10.57
Input HP	12.19
Input Style	C-Face Coupled
Input RPM	1,750
Assembly	TM-L
Ratio Range	25:1
Shaft Seal Material	Viton
Output Style	L
Gear Type	Worm
Input Bore (C Face)	0.875
Service Factor	1
No. of Gear Reductions	Single
Product Type	Right Angle
Center Distance (in)	5.25
Model Code	TM852
Input Keyway	1/4 x 3.00 in
Input Diameter (in)	0.875 in
Series Style	EL-TM-L
Mounting Style	Horizontal Base, Worm Over
Output Shaft Assembly Code	L
Motor Frame Size	140TC
Product Line	EL Series - Aluminum Worm Gear Reducers
Output Diameter (in)	2.000 in
Input Keyway (C Face)	5/16 x 5/32
Reduction	Single
Output Shaft Direction	Left
Housing Material	Aluminum
Output Shaft	Shaft
Output Torque Rating (in-lb)	9517 in/lbs

General Specifications

Weight

176.00 LB