• Aluminum housing provides superior resistances to corrosion, even in harsh environments.
• Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant – USDA Class H1 approved.
• Large oil capacity provides positive splash lubrication and superior cooling capability.
• Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
• Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.
• Tapered roller bearings on output shaft for high overhung and thrust load capacities.
• The unique quill seal guard protects the input seal from damage during motor installation.
• All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
• Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
• Mounting dimensions are interchangeable with most industry standard reducers.

Dimensions

AK	4.5
B	9.88
C	9.69 in
F	7.5
T	1.5
V	0.75 in
I	4.81 in
BE	0.38 in
Center Distance (in)	3 in
AJ	5.88
D	4.25
N	6.62
K	4.19 in
Hole dia	0.56 in
BD	6.5
L1	5.38 in
LM	7.67
BF	0.41
O	3.6 in
G	3.75
J	8.38 in
U	0.875 in
A	9

Technical Specifications

Output HP	2.332
Input HP	2.879
Assembly	TM-R
Output Key	3/8 X 2.25
Ratio	30:1
Output RPM	58
Output Shaft Orientation	R
Reducer	Worm - Right Angle
Series	EL Series - Aluminum Worm Gear Reducers
Reducer Style	Worm - Right Angle
Frame Size	56C
Input RPM	1,750
Input Style	C-Face Coupled
Overhung Load	2,170
No. of Gear Reductions	Single
Product Line	EL Series - Aluminum Worm Gear Reducers
Service Factor	1
Series Style	EL-TM-R
Output Style	R
Shaft Seal Material	Viton
Gear Type	Worm
Input Diameter (in)	0.625 in
Model Code	TM830
Output Shaft Assembly Code	R
Input Keyway	3/16 X 1.63 in
Output Diameter (in)	1.500 in
Input Keyway (C Face)	3/16 x 3/32
Product Type	Right Angle
Mounting Style	Horizontal Base, Worm Over
Ratio Range	30:1
Input Bore (C Face)	0.625
Motor Frame Size	56C
Center Distance (in)	3.00
Reduction	Single
Output Shaft Direction	Right
Housing Material	Aluminum
Output Torque Rating (in-lb)	2519 in/lbs
Output Shaft	Shaft

General Specifications

Weight

52.00 LB