• Aluminum housing provides superior resistances to corrosion, even in harsh environments.
• Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant – USDA Class H1 approved.
• Large oil capacity provides positive splash lubrication and superior cooling capability.
• Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
• Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.
• Tapered roller bearings on output shaft for high overhung and thrust load capacities.
• The unique quill seal guard protects the input seal from damage during motor installation.
• All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
• Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
• Mounting dimensions are interchangeable with most industry standard reducers.

Dimensions

Hole dia	0.47 in
T	1.125
K	3.09 in
F	4.88
D	3.25
BE1	0.5 in
BD	9
G	2.44
LM1	7.3
O	2.66 in
U	0.75 in
AK	8.5
N	5.14
I	3.61 in
C	7.63 in
Center Distance (in)	2.38 in
BF	0.53
J	6.19 in
L1	4.29 in
AJ	7.25
V	0.75 in
B	7.69
A	6.38

Technical Specifications

Output Key	1/4 X 1.62
Series	EL Series - Aluminum Worm Gear Reducers
Assembly	TM-L
Input RPM	1,750
Ratio	5:1
Input Style	C-Face Coupled
Reducer Style	Worm - Right Angle
Overhung Load	1,770
Input HP	5.323
Output RPM	350
Output Shaft Orientation	L
Reducer	Worm - Right Angle
Output HP	4.985
Frame Size	180TC
Center Distance (in)	2.38
Input Keyway (C Face)	1/4 x 1/8
Output Diameter (in)	1.125 in
Input Keyway	3/16 X 1.63 in
Output Shaft Assembly Code	L
Motor Frame Size	180TC
Mounting Style	Horizontal Base, Worm Over
Output Style	L
Shaft Seal Material	Viton
Product Line	EL Series - Aluminum Worm Gear Reducers
Service Factor	1
No. of Gear Reductions	Single
Product Type	Right Angle
Ratio Range	5:1
Input Bore (C Face)	1.125
Model Code	TM824
Gear Type	Worm
Input Diameter (in)	1.125 in
Series Style	EL-TM-L
Reduction	Single
Output Shaft Direction	Left
Housing Material	Aluminum
Output Torque Rating (in-lb)	898 in/lbs
Output Shaft	Shaft

General Specifications

Weight

34.00 LB