• Aluminum housing provides superior resistances to corrosion, even in harsh environments.
• Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant – USDA Class H1 approved.
• Large oil capacity provides positive splash lubrication and superior cooling capability.
• Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
• Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.
• Tapered roller bearings on output shaft for high overhung and thrust load capacities.
• The unique quill seal guard protects the input seal from damage during motor installation.
• All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
• Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
• Mounting dimensions are interchangeable with most industry standard reducers.

Dimensions

BF	0.41
O	2.05 in
V	0.56 in
AK	4.5
Hole dia	0.38 in
K	2.63 in
Center Distance (in)	1.75 in
T	0.75
U	0.625 in
B	6.06
LM	5.89
BE	0.38 in
I	3.03 in
L1	3.64 in
C	6.42 in
J	5.25 in
BD	6.5
N	4.39
F	4.38
G	2.19
D	2.84
AJ	5.88
A	5.19

Technical Specifications

Series	EL Series - Aluminum Worm Gear Reducers
Overhung Load	920
Reducer Style	Worm - Right Angle
Reducer	Worm - Right Angle
Ratio	7.5:1
Output Shaft Orientation	L
Input RPM	1,750
Frame Size	56C
Assembly	TM-L
Output Key	3/16 X 1.38
Input HP	1.909
Output RPM	233
Output HP	1.745
Input Style	C-Face Coupled
No. of Gear Reductions	Single
Shaft Seal Material	Viton
Ratio Range	7.5:1
Motor Frame Size	56C
Output Diameter (in)	0.750 in
Input Bore (C Face)	0.625
Mounting Style	Horizontal Base, Worm Over
Output Shaft Assembly Code	L
Input Diameter (in)	0.625 in
Service Factor	1
Output Style	L
Center Distance (in)	1.75
Product Type	Right Angle
Product Line	EL Series - Aluminum Worm Gear Reducers
Gear Type	Worm
Series Style	EL-TM-L
Input Keyway	3/16 X .500 in
Input Keyway (C Face)	3/16 x 3/32
Model Code	TM818
Reduction	Single
Output Shaft Direction	Left
Output Torque Rating (in-lb)	471 in/lbs
Housing Material	Aluminum
Output Shaft	Shaft

General Specifications

Weight

19.00 LB