• 70°C ambient
• Enclosed shaft end bracket, vented frame
• Automatic reset thermal protector
• Nameplate 60/50 hertz 190/380 volts, at next lower HP
• Double sealed ball bearings
• 5/8” Dia. x 5” long shaft with flat and keyway
• Threaded lead exit
• Patented VCD™ - Voltage Change Device
• 4 Locating screws 90 degrees apart, 3.33” from outer edge of shaft slinger
• Hubs on both ends will accept resilient base kits.

Nameplate Specifications

Phase	3
Output HP	1 & 0.75 Hp
Output KW	0.75 & 0.56 kW
Voltage	200-230/460 & 190/380 V
Speed	850 & 710 rpm
Service Factor	1.0 & 1.0
Frame	56Y
Enclosure	Open Air Over
Thermal Protection	Automatic
Efficiency	74.5 & 72 %
Ambient Temperature	70 °C
Frequency	60 & 50 Hz
Current	5.3-5.3/2.65 & 4.6/2.3 A
Power Factor	52.5
Duty	Continuous
Insulation Class	H
Design Code	NO DESIGN CODE
KVA Code	J
Drive End Bearing Size	6203
Opp Drive End Bearing Size	6203
UL	Recognized
CSA	Y
CE	N
IP Code	10
Number of Speeds	1

Technical Specifications

Electrical Type	Squirrel Cage Induction Run
Starting Method	Across The Line
Poles	8
Rotation	Reversible
Resistance Main	17.6 Ohms
Mounting	Round Belly Band
Motor Orientation	Horizontal
Drive End Bearing	Ball
Opp Drive End Bearing	Ball
Frame Material	Rolled Steel
Shaft Type	Single Special Extension
Overall Length	17.06 in
Frame Length	9.56 in
Shaft Diameter	0.625 in
Shaft Extension	5.06 in
Assembly/Box Mounting	F1 ONLY

General Specifications

UPC	722856049025
Weight	46.00 LB
Packaged Length	19.88 IN
Packaged Width	10.25 IN
Packaged Height	8.12 IN
HTC	8501.51.6040
Country of Origin	Mexico