• Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
• Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
• Large oil capacity provides positive splash lubrication and superior cooling capability.
• Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
• O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
• Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
• The unique quill seal guard protects the input seal from damage during motor installation.
• Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
• All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
• Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.

Dimensions

D	2.69
X	7.06 in
R	3.53 in
Center Distance (in)	2.38 in
BD	6.5
RQ	4.09 in
BE	0.38 in
LL	2.12 in
I	3.77 in
AJ	5.88
Y	6.24 in
N	2.53
C	6.88 in
AK	4.5
LQ	4.63 in
B	5.25
V	1.94 in
T	1.5
BF	0.41
H	0.34 in
A	2.94

Technical Specifications

Assembly	FHMQ
Input HP	3.564
Reducer Style	Worm - Right Angle
Output RPM	175
Keyway	3/16 X 3/32
Ratio	10:1
Input Style	C-Face Quill
Reducer	Worm - Right Angle
Output HP	3.253
Input RPM	1,750
Output Shaft Orientation	HR
Output Key	1/4 X 2.50
Series	NH Series - Ironman Narrow Housing Worm Gear Reducers
Frame Size	56C
Output Diameter (in)	1.000 in
Series Style	NH-FHMQ-HR
Center Distance (in)	2.38
Product Type	Right Angle
Motor Frame Size	56C
Output Style	HR
Gear Type	Worm
Model Code	FHMQ824
Mounting Style	Flange Mounted Hollow Output Bore
Output Shaft Assembly Code	HR
Bore Code	16
Input Diameter (in)	0.625 in
No. of Gear Reductions	Single
Input Quill Diameter (in)	0.625 in
Service Factor	1
Input Bore (C Face)	0.625
Input Keyway (C Face)	3/16 x 3/32
Ratio Range	10:1
Product Line	NH Series - Ironman Narrow Housing Worm Gear Reducers
Shaft Seal Material	Viton
Reduction	Single
Output Shaft	Hollow Bore
Housing Material	Cast Iron
Output Torque Rating (in-lb)	1172 in/lbs

General Specifications

Weight

43.00 LB